Effects of salt intake reduction by urinary sodium to potassium ratio self-monitoring method.

Effective and feasible educational methods are needed to control salt intake. We performed a single-center, non-randomized controlled study to investigate the effectiveness and feasibility of self-monitoring using a urinary sodium/potassium (Na/K) ratio-measuring device in patients with difficulty in reducing salt intake. This study included 160 patients with hypertension, chronic kidney disease, or heart disease who were followed up in the outpatient clinic of the Dokkyo Medical University Nikko Medical Center. Urinary Na/K ratio measuring Na/K ratio meter were loaned for 2-6 weeks to the treatment (T) group (n = 80) and not to the patients in the control (C) group (n = 80). In the T group, patients were instructed to measure the urinary Na/K ratio at least three times a day and maintain a Na/K ratio below 2.0. Salt reduction education and home blood pressure measurement guidance continued in both groups. The mean device loan period in the T group was 25.1 days, the mean number of measurements was 3.0 times/day, and the proportion of patients achieving three measurements per day was 48.8% (39/80). Self-monitoring using the urinary Na/K ratio meter successfully reduced salt intake by -1.9 g/day at the second visit (p < 0.001) in the T group. In contrast, no change was observed over time in the C group. Self-monitoring using the urinary Na/K ratio meter successfully reduced salt intake in patients with difficulty reducing salt intake.

Relationship Between Increased Oxygen Uptake and Lactate Production With Progressive Incremental Electrode Skeletal Muscle Stimulation: A Pilot Study.

Background Belt electrode skeletal muscle stimulation (B-SES) is an alternative exercise therapy for those with difficulty performing voluntary exercise. However, it is unknown whether oxygen uptake (VO2) in B-SES is comparable to cardiopulmonary exercise test (CPX) as assessed by voluntary exercise. This study aimed to evaluate oxygen uptake (VO2) and lactate (LA) production in incremental B-SES compared to ergometer CPX and to determine the relationship with ergometer CPX. Methods This study included 10 healthy young Japanese participants. Using a crossover design, all participants underwent incremental B-SES CPX and ergometer CPX using a 20 W ramp. Serum lactic acid concentration (LA) was measured serially before, during, and after B-SES. The tolerability of B-SES was adjusted with the change in LA level (⊿LA). Results Peak VO2 during B-SES (14.1±3.3 mL/kg/min) was significantly lower than ergometer peak VO2 (30.2±6.2 mL/kg/min, P<0.001). B-SES peak VO2 was similar to the anaerobic threshold (AT) VO2 on ergometer CPX (15.1±2.6 mL/kg/min). LA (Rest: 1.4±0.3, Peak: 2.8±0.8 mmol) and plasma noradrenalin (Rest: 0.2±0.1, Peak: 0.4±0.1 ng/mL) levels increased after B-SES. No significant correlation was observed between B-SES peak VO2 and ergometer CPX. However, after adjusting for B-SES, tolerability, it (peak VO2 of B-SES /⊿LA) correlated with peak VO2 (r=0.688, p=0.028) on the ergometer. Conclusion Peak VO2 of the passively progressive B-SES almost reached the AT value of the ergometer CPX without adverse events. Peak VO2 of B-SES adjusted with ⊿LA may be used to predict peak VO2 in ergometer CPX.

Successful Transvenous Implantation of a Permanent Pacemaker in a Patient with Situs Inversus with Dextrocardia Supported by Preceding Three-dimensional Computed Tomography: A Case Report.

We herein report a 76-year-old woman with situs inversus and dextrocardia who underwent pacemaker implantation for sick sinus syndrome. Situs inversus with dextrocardia, which is frequently associated with cardiovascular malformation, is a rare congenital malformation wherein the thoracic and abdominal viscera are inverted compared with their normal positions. This renders the implantation of cardiac devices an arduous task. We therefore decided to gather preoperative anatomical information on patients with situs inversus and dextrocardia. We used three-dimensional computed tomography to collect preoperative information in order to facilitate the safe implantation of cardiac devices.

Interaction between the substrate and probe in liquid metal Ga: experimental and theoretical analysis.

Interaction between two bodies in a liquid metal is an important topic for development of metallic products with high performance. We conducted atomic force microscopy measurements and achieved the interaction between the substrate and the probe in liquid Ga of an opaque and highly viscous liquid. The interaction cannot be accessed with the normal atomic force microscopy, electron microscopy, and beam reflectometry. We performed a theoretical calculation using statistical mechanics of simple liquids by mixing an experimentally derived quantum effect. From both experiment and theory, we found an unusual behaviour in the interaction between the solvophobic substances, which has never been reported in water and ionic liquids. Shapes of the interaction curves between several solvophobic and solvophilic pairs in liquid Ga are also studied.

Fundamental and higher eigenmodes of qPlus sensors with a long probe for vertical-lateral bimodal atomic force microscopy.

The detection of vertical and lateral forces at the nanoscale by atomic force microscopy (AFM) reveals various mechanical properties on surfaces. The qPlus sensor is a widely used force sensor, which is built from a quartz tuning fork (QTF) and a sharpened metal probe, capable of high-resolution imaging in viscous liquids such as lubricant oils. Although a simultaneous detection technique of vertical and lateral forces by using a qPlus sensor is required in the field of nanotribology, it has still been difficult because the torsional oscillations of QTFs cannot be detected. In this paper, we propose a method to simultaneously detect vertical and lateral force components by using a qPlus sensor with a long probe. The first three eigenmodes of the qPlus sensor with a long probe are theoretically studied by solving a set of equations of motion for the QTF prong and probe. The calculation results were in good agreement with the experimental results. It was found that the tip oscillates laterally in the second and third modes. Finally, we performed friction anisotropy measurements on a polymer film by using a bimodal AFM utilizing the qPlus sensor with a long probe to confirm the lateral force detection.

Recent Advances in the Treatment of Pulmonary Arterial Hypertension.

Pulmonary arterial hypertension (PAH) is a disease in which stenosis or obstruction of the pulmonary arteries (PAs) causes an increase in PA pressure, leading to right-sided heart failure and death. Basic research has revealed a decrease in the levels of endogenous vasodilators, such as prostacyclin, and an increase in the levels of endogenous vasoconstrictors, such as endothelin, in patients with PAH, leading to the development of therapeutic agents. Currently, therapeutic agents for PAH target three pathways that are selective for PAs: the prostacyclin, endothelin, and nitric oxide pathways. These treatments improve the prognosis of PAH patients. In this review, we introduce new drug therapies and provide an overview of the current therapeutic agents.

Controlled Growth of Organosilane Micropatterns on Hydrophilic and Hydrophobic Surfaces Templated by Vacuum Ultraviolet Photolithography.

In this report, micropatterns of (3-aminopropyl)trimethoxysilane (APTMS) were developed on hydrophilic and hydrophobic surfaces after patterning using 172 nm vacuum ultraviolet (VUV) photolithography. Self-assembled monolayers (SAMs) formed on Si substrates through UV hydrosilylation of 1-hexadecene (HD) and 10-undecenoic acid (UDA) were used as hydrophilic and hydrophobic surfaces, respectively. For templating the HD- and UDA-SAMs, the VUV light was exposed to HD- and UDA-SAMs from the slits of photomasks in atmospheric and evacuated environments, respectively. Various oxygenated groups were generated at the exposed domains of HD-SAM, while the COOH groups were trimmed from the irradiated domains of UDA-SAM. The APTMS molecules were immobilized on the domains that were terminated by oxygenated groups after chemical vapor deposition (CVD). The thicknesses of the developed APTMS micropatterns increased significantly by raising the CVD temperature and in the presence of ambient air in the CVD Teflon container as well. The increase in thicknesses was ascribed to the formation of APTMS multilayers, which were mediated by H3N+ ions. Also, the developed APTMS micropatterns on the UDA-SAM patterned by VUV light irradiation in a high-vacuum environment (HV-VUV) were thicker than those on the VUV/(O) patterned HD-SAM due to the presence of inactive oxygenated groups at the surface of VUV/(O)-terminated domains of HD-SAM such as COO-C and C-O-C groups. The presence of water or ambient air facilitated the silane coupling between the silyl groups with the oxygenated and amino groups The combination of VUV photolithography and the CVD method with control of the conditions would enable us to control the thicknesses and shapes of the developed APTMS micropatterns. These findings illustrate the applicability of VUV photolithography for templating hydrophobic and hydrophobic surfaces toward the development of organosilane architectures, which can be feasible for several applications.

Chemical Etching of Silicon Assisted by Graphene Oxide in an HF-HNO3 Solution and Its Catalytic Mechanism.

Chemical etching of silicon assisted by various types of carbon materials is drawing much attention for the fabrication of silicon micro/nanostructures. We developed a method of chemical etching of silicon that utilizes graphene oxide (GO) sheets to promote the etching reaction in a hydrofluoric acid-nitric acid (HF-HNO3) etchant. By using an optimized composition of the HF-HNO3 etchant, the etching rate under the GO sheets was 100 times faster than that of our HF-H2O2 system used in a previous report. Kinetic analyses showed that the activation energy of the etching reaction was almost the same at both the bare silicon and GO-covered areas. We propose that adsorption sites for the reactant in the GO sheets enhance the reaction frequency, leading to a deeper etching in the GO areas than the bare areas. Furthermore, GO sheets with more defects were found to have higher catalytic activities. This suggests that defects in the GO sheets function as adsorption sites for the reactant, thereby enhancing the etching rate under the sheets.

Gender Differences in the Circadian and Seasonal Variations in Patients with Takotsubo Syndrome: A Multicenter Registry at Eight University Hospitals in East Japan.

Objective The aim of this study was to clarify the circadian and seasonal variations in addition to identify sex-based differences in Japanese patients with Takotsubo syndrome (TTS). Methods The authors conducted a retrospective observational study to analyse the differences between the groups based on sex. Patients The patients were registered out of each institute registry of the acute coronary syndrome (ACS) which contains a total of 10,622 cases in eight academic hospitals in east Japan. Results Data for 344 consecutive TTS (73 male and 271 female) were extracted from each hospital registry. In-hospital mortality was higher in the male group than in the female group (18% vs. 7%; p=0.005). With regard to the circadian variations in all study patients, TTS events occurred most often in the afternoon and least often during the night. Moreover, the patterns of circadian variations in the female and male groups were the same as that of all study patients. TTS events occurred most frequently in the autumn and least often in the spring in the whole study cohort. Moreover, the seasonal variation in the female group showed the same pattern as that of the whole cohort. However, there were no significant seasonal differences in the incidence of TTS in the male group. Conclusion In a multicenter study in Japan, seasonal variation was observed in the female group but not in the male group. Circadian variation was observed in both groups. These results suggested that the pathogenesis and clinical features of TTS might therefore differ according to sex.

Effects of whole-body neuromuscular electrical stimulation device on hemodynamics, arrhythmia, and sublingual microcirculation.

Neuromuscular electrical stimulation has been used to treat cardiovascular diseases and other types of muscular dysfunction. A novel whole-body neuromuscular electrical stimulation (WB-NMES) wearable device may be beneficial when combined with voluntary exercises. This study aimed to investigate the safety and effects of the WB-NMES on hemodynamics, arrhythmia, and sublingual microcirculation. The study included 19 healthy Japanese volunteers, aged 22-33 years, who were not using any medication. Electrocardiogram (ECG), echocardiography, and blood sampling were conducted before a 20-min WB-NMES session and at 0 and 10 min after termination of WB-NMES. Their tolerable maximum intensity was recorded using numeric rating scale. Arrhythmia was not detected during neuromuscular electrical stimulation or during 10 min of recovery. Blood pressure, heart rate, left ventricular ejection fraction, and diastolic function remained unchanged; however, mild mitral regurgitation was transiently observed during WB-NMES in a single male participant. A decrease in blood glucose and an increase in blood lactate levels were observed, but no changes in blood fluidity, sublingual microcirculation, blood levels of noradrenaline, or oxidative stress were shown. WB-NMES is safe and effective for decreasing blood glucose and increasing blood lactate levels without changing the blood fluidity or microcirculation in healthy people.

Association between acute myocardial infarction-to-cardiac rupture time and in-hospital mortality risk: a retrospective analysis of multicenter registry data from the Cardiovascular Research Consortium-8 Universities (CIRC-8U).

Despite the known association of cardiac rupture with acute myocardial infarction (AMI), it is still unclear whether the clinical characteristics are associated with the risk of in-hospital mortality in patients with AMI complicated by cardiac rupture. The purpose of this study was to investigate the association between the time of cardiac rupture occurrence and the risk of in-hospital mortality after AMI. We conducted a retrospective analysis of multicenter registry data from eight medical universities in Eastern Japan. From 10,278 consecutive patients with AMI, we included 183 patients who had cardiac rupture after AMI, and examined the incidence of in-hospital deaths during a median follow-up of 26 days. Patients were stratified into three groups according to the AMI-to-cardiac rupture time, namely the > 24-h group (n = 111), 24-48-h group (n = 20), and < 48-h group (n = 52). Cox proportional hazards regression analysis was used to estimate the hazard ratio (HR) and the confidence interval (CI) for in-hospital mortality. Around 87 (48%) patients experienced in-hospital death and 126 (67%) underwent a cardiac surgery. Multivariable Cox regression analysis revealed a non-linear association across the three groups for mortality (HR [CI]; < 24 h: 1.0, reference; 24-48 h: 0.73 [0.27-1.86]; > 48 h: 2.25 [1.22-4.15]) after adjustments for age, sex, Killip classification, percutaneous coronary intervention, blood pressure, creatinine, peak creatine kinase myocardial band fraction, left ventricular ejection fraction, and type of rupture. Cardiac surgery was independently associated with a reduction in the HR of mortality (HR [CI]: 0.27 [0.12-0.61]) and attenuated the association between the three AMI-to-cardiac rupture time categories and mortality (statistically non-significant) in the Cox model. These data suggest that the AMI-to-cardiac rupture time contributes significantly to the risk of in-hospital mortality; however, rapid diagnosis and prompt surgical interventions are crucial for improving outcomes in patients with cardiac rupture after AMI.

Clinical and procedure characteristics in patients treated with polytetrafluoroethylene-covered stents after coronary perforation: a CIRC-8U multicenter registry and literature review.

This study aimed at identifying the clinical characteristics and in-hospital outcomes of patients treated with polytetrafluorethylene (PTFE)-covered stents after coronary interventions in a multicenter registry. Subjects with coronary artery perforation were selected from 31,262 consecutive patients who underwent coronary interventions in the hospital registries. Subjects were divided into two groups: those with a PTFE-covered stent implantation and those without a PTFE-covered stent implantation. Clinical characteristics and in-hospital outcomes were compared between the two groups. Data for 82 consecutive coronary perforations (15 PTFE-covered stents and 67 non-PTFE-covered stents) were extracted from each hospital registry. The PTFE-covered stent group had a higher prevalence of perforations due to pre-dilatation before stenting or post-dilatation after stenting (80% vs. 10.4%; p < 0.001), more Ellis classification III perforations (66.6% vs. 28.4%; p = 0.019), longer perforation to hemostasis time (74 min vs. 10 min; p < 0.001), lower hemostatic success rates (73.3% vs. 94.0%; p = 0.015), and higher in-hospital mortality (26.7% vs. 6.0%; p = 0.015) than the non-PTFE-covered stent group. Although the prevalence of intravascular ultrasound (IVUS) usage was high during coronary interventions (86.7%), IVUS was performed in less than half the cases just before coronary perforations (47%) in the PTFE-covered stent group. Patients requiring PTFE-covered stents are more likely to be observed after balloon dilatation before or after stenting and have a poor prognosis. Careful coronary intervention is needed when IVUS image acquisition is not achieved in addition to proper evaluation of IVUS. Furthermore, if coronary artery perforation occurs, it is important to determine the need for a prompt PTFE-covered stent.

Microstructured SiOx/COP Stamps for Patterning TiO2 on Polymer Substrates via Microcontact Printing.

Microcontact printing (µCP) techniques have sparked a surge of interests in microfabrication since they help produce arrays on a wide range of target substrates in a facile and efficient manner. Polydimethylsiloxane (PDMS), as a well-established material for stamps, has constraints resulting from its hydrophobicity and softness, and the replication of PDMS stamps usually requires rigid masters or processes using a photoresist. Herein, a novel µCP stamp based on cyclo-olefin polymer (COP) is produced through vacuum ultraviolet (VUV) lithography. 2,4,6,8-Tetramethylcyclotetrasiloxane is selectively deposited at the affinity-patterns on the COP surface, and these patterned siloxane films are converted into SiOx meanwhile protecting the COP beneath them from the VUV photoetching. By this means, a patterned relief is fabricated on the COP plates, resulting in a hydrophilic SiOx/COP µCP stamp with punch heights of ∼180 nm. The novelty arises from the simplicity of the master- and photoresist-free microstructuring, and the higher stiffness of SiOx/COP stamps prevents the deformation during pressing. Finally, an example µCP is given to transfer titania precursor gel and produce TiO2 micropatterns on flexible polymer substrates. The SiOx/COP stamps and the µCP of TiO2 provide simple and cost-effective patterning techniques, which should contribute to the future design and creation of flexible devices.

Structural-Defect-Mediated Grafting of Alkylamine on Few-Layer MoS2 and Its Potential for Enhancement of Tribological Properties.

Two-dimensional transition-metal dichalcogenides possess inherent structural characteristics that can be harnessed for enhancement of tribological properties by making them dispersible in lube media. Here, we present a hydrothermal approach to preparing MoS2 nanosheets comprising 4-10 molecular lamellae. A structural-defect-mediated route for grafting of octadecylamine (ODA) on MoS2 nanosheets is outlined. The unsaturated d orbitals of Mo at the sulfur vacancies on the MoS2 surface are coupled with the electron-rich nitrogen center of ODA and yield ODA-functionalized MoS2 (MoS2-ODA). The MoS2-ODA nanosheets exhibit good dispersibility in lube base oil and are used as an additive (optimized dose: 0.1 mg·mL-1) to mineral oil. It is shown that even at low concentration, MoS2-ODA nanosheets significantly reduce the friction (48%) and wear (44%). Microscopy (field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM)) and spectroscopy (Raman and elemental mapping) analyses of worn scars revealed the formation of MoS2-based protective thin films for lowering of friction and wear. This work, therefore, presents a pathway for low-friction lubricants by deploying functionalized low-dimensional material systems.

A multicenter study on the clinical characteristics and risk factors of in-hospital mortality in patients with mechanical complications following acute myocardial infarction.

Mechanical complications (MCs) following acute myocardial infarction (AMI), such as ventricular septal rupture (VSR), free-wall rupture (FWR), and papillary muscle rupture (PMR), are fatal. However, the risk factors of in-hospital mortality among patients with MCs have not been previously reported in Japan. The purpose of this study was to evaluate the prognostic factors of in-hospital mortality in these patients. The study cohort consisted of 233 consecutive patients with MCs from the registry of 10 facilities in the Cardiovascular Research Consortium-8 Universities (CIRC-8U) in East Japan between 1997 and 2014 (2.3% of 10,278 AMI patients). The authors conducted a retrospective observational study to analyse the correlation between the subtypes of MCs with in-hospital mortality, clinical data, and medical treatment. We observed a decreasing incidence of MC (1997-2004: 3.7%, 2005-2010: 2.1%, 2011-2014: 1.9%, p < 0.001). In-hospital mortality among patients with MCs was 46%. Thirty-three percent of patients with MCs were not able to undergo surgical repair due to advanced age or severe cardiogenic shock. In-hospital mortality among patients who had undergone surgical repair was 29% (VSR: 21%, FWR: 33%, PMR: 60%). In patients with MCs, hazard ratio for in-hospital mortality according to multivariate analysis of without surgical repair was 5.63 (95% CI 3.54-8.95). In patients with surgical repair, the hazard ratios of blow-out-type FWR (5.53, 95% confidence interval (CI) 2.22-13.76), those with renal dysfunction (3.11, 95% CI 1.37-7.05), and those receiving venoarterial extracorporeal membrane oxygenation (VA-ECMO) (3.79, 95% CI 1.81-7.96) were significantly high. Although primary percutaneous coronary intervention (PCI) is associated with decreased incidence of MCs, high in-hospital mortality persisted in patients with MCs that also presented with renal dysfunction and in those requiring VA-ECMO. Early detection and surgical repair of MCs are essential.

Clinically feasible method for assessing leukocyte rheology in whole blood.

This study reports a novel method for assessment of leukocyte rheological activation with a new designed microchannel array chip to mimic the human microvascular network for microchannel array flow analysis (MCFAN). Study subjects were 79 healthy volunteers and 42 patients with type 2 diabetes mellitus (DM) and 36 patients with acute coronary syndrome (ACS). Using the anticoagulants heparin and ethylene-diamine-tetraacetic acid (EDTA)-2Na which inhibits platelets and leukocytes by chelating Ca2+, we were able to quantify leukocyte rheological activation by the subtraction of passage time of blood treated with both heparin and EDTA-2Na from that of blood treated with heparin only. We confirmed that passage times of whole blood with heparin + EDTA-2Na were always shorter than those of whole blood with only heparin in healthy subjects and patients with DM or ACS under suction pressures of - 30 cmH2O. There was a significant correlation between delta whole blood passage time {(heparin tube) - (EDTA-2Na + heparin)} and serum levels of myeloperoxidase and adhesive leukocyte number, respectively, even in blood from patients with DM or ACS, who suffered from inflammation. In conclusion we have developed a clinically feasible method for assessing leukocyte rheological activation in whole blood in ex vivo.

Superelastic Multifunctional Aminosilane-Crosslinked Graphene Aerogels for High Thermal Insulation, Three-Component Separation, and Strain/Pressure-Sensing Arrays.

Aerogels have attracted great interest for their unique properties, but their mechanical brittleness and poor functionality highly limit their practical applications. Herein, we report unprecedented superelastic multifunctional aminosilane-crosslinked reduced graphene oxide (AC-rGO) aerogels that are prepared via a facile and scalable strategy involving simultaneous crosslinking and reducing of graphene oxide nanosheets with different kinds of aminosilanes via C-N coupling and hydrolytic polycondensation reactions. It is found that 3-aminopropyl(diethoxy)methylsilane (APDEMS) is the better choice to enhance hydrophobicity, elasticity, and other properties of the resulting aerogels compared with (3-aminopropyl)triethoxysilane. One APDEMS molecule plays three roles as a crosslinker, a reductant, and a hydrophobizing agent. An outstanding combination of high surface area, ultralow density, superhydrophobicity, supercompressibility, superelasticity, low thermal conductivity, ultrahigh absorption capacity for organic liquids, efficient three-component separation, and strain/pressure sensing has been achieved in a single APDEMS-crosslinked rGO aerogel for the first time. In addition, a flexible, highly sensitive, and moisture-resistant AC-rGO aerogel-based strain/pressure-sensing array for the effective detection of strain (0-80%)/pressure (10 Pa to 10 kPa) distributions and object shapes has been demonstrated.

Alkylated graphene oxide and reduced graphene oxide: Grafting density, dispersion stability to enhancement of lubrication properties.

Alkylated graphene oxide (GO)/reduced graphene oxide (rGO) are prepared by covalent interaction with octadecyltrichlorosilane (OTCS) and octadecyltriethoxysilane (OTES). The variable oxygen functionalities in the GO/rGO and hydrolysis rate of octadecylsilanes having different leaving groups viz. trichloro and triethoxy found to govern the grafting density of octadecyl chains on the GO and rGO. FTIR, XPS, and TGA results revealed a higher grafting of octadecyl chains in the GO-OTCS, whereas the rGO-OTES exhibited minimum grafting. The van der Waals interaction between the octadecyl chain of alkylated GO/rGO and octadecenyl chains of polyol ester makes alkylated GO/rGO dispersible in the polyol lube base oil. The dispersion stability is collectively driven by grafting density of octadecyl chains and presence of oxygen functionalities in the GO/rGO. Tribological properties in terms of the coefficient of friction and wear scar diameter revealed a good correlation with the structure of alkylated GO/rGO and their dispersion stability in the polyol lube base oil. Raman analysis of the worn surface revealed the sheared-induced deposition of a graphene-based tribo-thin film, which reduced the friction and protected the tribo-interfaces against the wear.

Formation of submicron-sized silica patterns on flexible polymer substrates based on vacuum ultraviolet photo-oxidation.

Formation of precise and high-resolution silica micropatterns on polymer substrates is of importance in surface structuring for flexible device fabrication of optics, microelectronic, and biotechnology. To achieve that, substrates modified with affinity-patterns serve as a strategy for site-selective deposition. In the present paper, vacuum ultraviolet (VUV) treatment is utilized to achieve spatially-controlled surface functionalization on a cyclo-olefin polymer (COP) substrate. An organosilane, 2,4,6,8-tetramethylcyclotetrasiloxane (TMCTS), preferentially deposits on the functionalized regions. Well-defined patterns of TMCTS are formed with a minimum feature of ∼500 nm. The secondary VUV/(O)-treatment converts TMCTS into SiO x , meanwhile etches the bare COP surface, forming patterned SiO x /COP microstructures with an average height of ∼150 nm. The resulting SiO x patterns retain a good copy of TMCTS patterns, which are also consistent with the patterns of photomask used in polymer affinity-patterning. The high quality SiO x patterns are of interests in microdevice fabrication, and the hydrophilicity contrast and adjustable heights reveal their potential application as a "stamp" for microcontact printing (µCP) techniques.

1,2-Epoxyalkane: Another Precursor for Fabricating Alkoxy Self-Assembled Monolayers on Hydrogen-Terminated Si(111).

This work describes the UV alkoxylation of a series of 1,2-epoxyalkanes on the hydrogen-terminated silicon (H-Si) substrate. The formation of alkoxy self-assembled monolayers (SAMs) and the nature of bonding at the surface of H-Si were examined using water contact angle goniometer, spectroscopic ellipsometer, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy. UV exposure to 1,2-epoxyalkane mesitylene solution for 60 min formed alkoxy-SAMs onto H-Si with hydrophobic properties. The local molecular environment of the alkyl chains transitioned from a disordered, liquid-like state to an ordered, crystalline-like structure with increasing the chain length. XPS and FTIR indicated that the reaction of H-Si with 1,2-epoxyalkane produced Si-O-C linkages. The Si-H bond homolysis and electron/hole were the plausible mechanistic routes for the grafting of 1,2-epoxyalkanes.